Mundra
Preferred for Gujarat extrusion belt (Mundra, Bhavnagar, Vadodara).
6063 Aluminum Extrusion Scrap Supply Line to India
India's extrusion industry produces over 1.4 million tonnes per year, with most capacity concentrated in Gujarat, Haryana, Maharashtra and Tamil Nadu. Premium 6063 extrusion scrap is the highest-yield feedstock for billet remelting because the chemistry is already inside the 6063 spec (Mg 0.45–0.9%, Si 0.20–0.6%) and the recovery rate exceeds 95%.
Nautica Metal Scrap B.V. collects 6063 extrusion offcuts directly from European architectural systems houses and window-frame manufacturers. We segregate paint-free Tale from painted Tutu, magnetically clean both, and ship 23–25 MT per 20-ft GP container directly to Indian extrusion recyclers.
Every consignment ships with XRF chemistry, mill-finish/anodised/painted breakdown and a PSIC formatted to MoEFCC requirements — the level of documentation Indian DGFT and customs expect from a serious European supplier.
Written for Indian extrusion plants, billet remelters and 6xxx-series alloy ingot makers that need consistent 6063 chemistry without the lottery of mixed-source local scrap.
India Importing Considerations
- 6063 extrusion scrap enters India under HS 7602.00 — 2.5% BCD + 18% IGST.
- Anodised vs painted 6063 must be declared on the packing list — affects the dross factor in your remelt yield calculation.
- PSIC is mandatory; Nautica issues SGS or BV reports with grade-wise weight breakdown.
- IEC + MoEFCC registration required at the buyer's side.
- Customs benchmark price (DGFT alert) is occasionally updated — we provide reference invoices to avoid valuation disputes.
HS / Tariff Codes
7602.00.10Aluminum waste and scrap (6063 extrusion)
Common Discharge Ports in India
Nhava Sheva (JNPT)
Main West-coast gateway for Maharashtra and Rajasthan plants.
Chennai
Default South-India port for Tamil Nadu and Karnataka extrusion recyclers.
Pipavav
Alternate Gujarat port — lower congestion in peak season.
ICD Garhi Harsaru
Inland depot for Haryana and Delhi NCR extrusion plants.
Logistics & Shipping
- Container load: 23–25 MT net per 20-ft GP, depending on offcut length.
- Long offcuts (>1.5 m) are bundled and strapped to prevent container damage.
- Sailing Rotterdam → Mundra: 22–25 days direct.
- Carrier rotation: Maersk, MSC, CMA CGM, Hapag-Lloyd.
- Full document set issued within 5 days of BL date.
Quality Standards
- •ISRI Tale — clean mill-finish 6063 extrusions, free of paint, oil and attachments.
- •ISRI Tutu — mixed low-copper aluminum, includes painted and anodised 6063.
- •Mg 0.45–0.9%, Si 0.20–0.6%, Fe max 0.35%, Cu max 0.10% — XRF-verified per lot.
- •Free of iron inserts, rubber gaskets, glass and plastic.
- •Paint/anodising layer fraction declared in writing per container.
Inspection Procedures
- •SGS, BV, Intertek or CCIC pre-shipment inspection at loading.
- •XRF chemistry on three random offcuts per container.
- •Length distribution check (short, medium, long) photographed for buyer reference.
- •Radiation scan + weighing slip + container seal photos included in the PSIC.
- •5 kg retention sample held 90 days from BL date.
Packaging Specifications
- •Loose loading for short offcuts (<1 m) — most cost-efficient.
- •Bundled and PP-strapped for long offcuts (1–6 m) — prevents twisting and container wall damage.
- •Big-bag option for very short offcuts and trim drops.
- •Container floor lined with kraft paper to absorb residual cutting oil.
- •High-security bolt seal — number printed on the BL.
6063 Aluminum Extrusion Scrap in India — Frequently Asked Questions
Ready to Discuss Your Metal Scrap Requirements?
Contact our sales team for competitive pricing, bulk orders, and customized solutions.MOQ: 25 MT | Monthly Capacity: 20,000 MT